Academy of Machines | Original service-access fit trainer
Quantity: 1 tray, 1 lift-off lid, 1 dummy controller card. All STL dimensions are in mm.
Request FDM in a suitable rigid filament such as PLA. Preserve the files at 100%.
Place the tray base, flat exterior of the lid and flat underside of the card on the build plate.
Confirm the tray measures 70 x 52 x 24 mm. The pocket provides 0.4 mm clearance per side.
Make one sample. Check the clipped corner seats by the key, the lid can lift off and the card
can be removed by its grip. Report binding before producing additional copies.
Contains no real electronics. For a mechanical bench exercise only.
